Effects of soil on the development, survival, and oviposition of Culex quinquefasciatus (Diptera: Culicidae) mosquitoes.

BACKGROUND: Water quality is known to influence the development and survival of larval mosquitoes, which affects mosquito-borne pathogen transmission as a function of the number of mosquitoes that reach adulthood and blood feed. Although water properties are known to affect mosquito development, few studies have investigated the link among soil properties, water quality, and mosquito development. Given the large number of ground-breeding mosquito species, this linkage is a potentially important factor to consider in mosquito ecology. In this study, we explored the effects of different soils on multiple life history parameters of the ground-breeding mosquito species Culex quinquefasciatus (Diptera: Culicidae). METHODS: Cx. quinquefasciatus larvae were reared in water combined with different soil substrates (sandy, silt, or clay loam textures) at increasing soil to water volume ratios, with and without the addition of organic matter (fish food). Gravid mosquitoes were offered different soil-water extracts to investigate soil effects on oviposition preference. RESULTS: Without the addition of organic matter, larval survival and development differed significantly among waters with different soil textures and volumes of substrate. Mosquitoes in water with clay loam soil survived longer and developed further than mosquitoes in other soil waters. Larvae survived for longer periods of time with increased volumes of soil substrate. Adding organic matter reduced the differences in larval survival time, development, and pupation among soil-water extracts. Adult female mosquitoes oviposited more frequently in water with clay loam soil, but the addition of organic matter reduced the soil effects on oviposition preference. CONCLUSIONS: This study suggests soil composition affects larval mosquito survival and development, as well as the oviposition preference of gravid females. Future studies could differentiate abiotic and biotic soil features that affect mosquitoes and incorporate soil variation at the landscape scale into models to predict mosquito population dynamics and mosquito-borne pathogen transmission.

Global Adoption of Genetically Modified (GM) Crops: Challenges for the Public Sector.

Advances in biotechnology continue to drive the development of a wide range of insect-protected, herbicide-tolerant, stress-tolerant, and nutritionally enhanced genetically modified (GM) crops, yet societal and public policy considerations may slow their commercialization. Such restrictions may disproportionately affect developing countries, as well as smaller entrepreneurial and public sector initiatives. The 2014 IUPAC International Congress of Pesticide Chemistry (San Francisco, CA, USA; August 2014) included a symposium on "Challenges Associated with Global Adoption of Agricultural Biotechnology" to review current obstacles in promoting GM crops. Challenges identified by symposium presenters included (i) poor public understanding of GM technology and the need for enhanced communication strategies, (ii) nonharmonized and prescriptive regulatory requirements, and (iii) limited experience with regulations and product development within some public sector programs. The need for holistic resistance management programs to enable the most effective use of insect-protected crops was also a point of emphasis. This paper provides details on the symposium discussion and provides background information that can be used in support of further adoption of beneficial GM crops. Overall, it emphasizes that global adoption of modern agricultural biotechnology has not only provided benefits to growers and consumers but has great potential to provide solutions to an increasing global population and diminishing agricultural land. This potential will be realized by continued scientific innovation, harmonized regulatory systems, and broader communication of the benefits of the high-yielding, disease-resistant, and nutritionally enhanced crops attainable through modern biotechnology.

Agrochemical spray drift; assessment and mitigation--a review.

During application of agrochemicals spray droplets can drift beyond the intended target to non-target receptors, including water, plants and animals. Factors affecting this spray drift include mode of application, droplet size, which can be modified by the nozzle types, formulation adjuvants, wind direction, wind speed, air stability, relative humidity, temperature and height of released spray relative to the crop canopy. The rate of fall of spray droplets depends upon the size of the droplets but is modified by entrainment in a mobile air mass and is also influenced by the rate of evaporation of the liquid constituting the aerosol. The longer the aerosol remains in the air before falling to the ground (or alternatively striking an object above ground) the greater the opportunity for it to be carried away from its intended target. In general, all size classes of droplets are capable of movement off target, but the smallest are likely to move the farthest before depositing on the ground or a non-target receptor. It is not possible to avoid spray drift completely but it can be minimized by using best-management practices. These include using appropriate nozzle types, shields, spray pressure, volumes per area sprayed, tractor speed and only spraying when climatic conditions are suitable. Field layout can also influence spray drift, whilst crop-free and spray-free buffer zones and windbreak crops can also have a mitigating effect. Various models are available to estimate the environmental exposure from spray drift at the time of application.

Children's inhalation exposure to methamidophos from sprayed potato fields in Washington State: exploring the use of probabilistic modeling of meteorological data in exposure assessment.

We examined the significance of meteorology and postspray volatilization of methamidophos (an organophosphorus insecticide) in assessing potential inhalation risk to children in an agricultural community. We combined fluxes from sources and dispersion modeling with a range of possible local meteorology to create output to study the variability in potential community exposure as a result of changing temperature, wind speeds and wind directions. This work is based on an aerial spray drift study where air sampling measurements of methamidophos were made before, during and after a spray event were used to examine acute inhalation risk for children living in an Eastern Washington State community in close proximity (between 15 and 200 m) to sprayed potato fields. We compared the measured average air concentrations of methamidophos in the community to a "no observed adverse effect level" for subchronic inhalation to characterize acute and subchronic inhalation risks. The baseline estimates of inhalation exposure were below Environment Protection Agency's (EPA) level of concern based on a target margin of exposure of 300. As meteorological conditions during and after spraying influence the amount of material moving into areas where children reside we used historical meteorological data to drive model simulations that predicted likely air residue concentrations under different wind and temperature conditions. We also added variability to the decay constant and initial emission fluxes to create a 2-D simulation of estimated air concentrations in the community near the fields. This work provides a methodological framework for the assessment of air concentrations of pesticides from agricultural sprays in the absence of extended measurements, although including variability from meteorological conditions. The deterministic as well as the probabilistic risk analyses in this study indicated that postspray volatilization in the specific spray situation analyzed (methamidophos applied on potato fields in Eastern Washington) did not pose acute or subchronic risks as defined by the EPA. However, this study did not consider any pathway of exposure other than inhalation (e.g. diet, dermal, etc.) and the risk assessment should be evaluated in that context.

Altered pesticide use on transgenic crops and the associated general impact from an environmental perspective.

The large-scale commercial cultivation of transgenic crops has undergone a steady increase since their introduction 10 years ago. Most of these crops bear introduced traits that are of agronomic importance, such as herbicide or insect resistance. These traits are likely to impact upon the use of pesticides on these crops, as well as the pesticide market as a whole. Organizations like USDA-ERS and NCFAP monitor the changes in crop pest management associated with the adoption of transgenic crops. As part of an IUPAC project on this topic, recent data are reviewed regarding the alterations in pesticide use that have been observed in practice. Most results indicate a decrease in the amounts of active ingredients applied to transgenic crops compared with conventional crops. In addition, a generic environmental indicator -- the environmental impact quotient (EIQ) -- has been applied by these authors and others to estimate the environmental consequences of the altered pesticide use on transgenic crops. The results show that the predicted environmental impact decreases in transgenic crops. With the advent of new types of agronomic trait and crops that have been genetically modified, it is useful to take also their potential environmental impacts into account.

Disposal and degradation of pesticide waste.

Generation of pesticide waste is inevitable during every agricultural operation from storage to use and equipment cleanup. Large-scale pesticide manufacturers can afford sophisticated recovery, treatment, and cleanup techniques. Small-scale pesticide users, for example, single farms or small application businesses, struggle with both past waste problems, including contaminated soils, and disposal of unused product and equipment rinsewater. Many of these problems have arisen as a result of inability to properly handle spills during, equipment loading and rinsewater generated after application. Small-scale facilities also face continued problems of wastewater handling. Old, obsolete pesticide stocks are a vexing problem in numerous developing countries. Pesticide waste is characterized by high concentrations of a diversity of chemicals and associated adjuvants. Dissipation of chemicals at elevated concentrations is much slower than at lower concentrations, in part because of microbial toxicity and mass transfer limitations. High concentrations of pesticides may also move faster to lower soil depths, especially when pore water becomes saturated wish a compound. Thus, if pesticide waste is not properly disposed of, groundwater and surface water contamination become probable. The Waste Management Hierarchy developed as an Australian Code of Practice can serve as a guide for development of a sound waste management plan. In order of desirability, the course of actions include waste avoidance, waste reduction, waste recycling, waste treatment, and waste disposal. Proper management of pesticide stocks, including adequate storage conditions, good inventory practices, and regular turnover of products,. will contribute to waste avoidance and reduction over the long-term. Farmers can also choose to use registered materials that have the lowest recommended application rates or are applied in the least volume of water. Wastewater that is generated during equipment rinsing can be recycled by spraying it onto cropland, thus avoiding a soil contamination problem. If it is not feasible to spray out rinsates, then water treatment becomes necessary. However, for small waste generators, practical technology is still too experimental and not easily implemented on an individual farm or at a small application business. Nevertheless, research has been quite active in application of advanced oxidation processes (UV/ozonation: photoassisted Fenton reaction: photocatalysis using TiO2). Obsolete pesticide stocks in developing countries are being packaged and shipped to developed countries for incineration. Contaminated soil can also be incinerated, but this is not practical nor affordable for small waste generators. Chemical degradation of chlorinated hydrocarbon pesticides may be amenable to dechlorination by alkali polyethylene glycol treatment, but further study is needed to make the technique practical for small waste generators. Contaminated soils may be amenable to cleanup by one of several biological treatment methods, including composting, landfarming, and bioaugmentation/ biostimulation. Composting and landfarming (which may be used in combination with biostimulation) may be the most practical of the biological methods that is immediately ready for implementation by small-scale pesticide waste generators.

Imidacloprid residues in Willapa Bay (Washington State) water and sediment following application for control of burrowing shrimp.

Pesticides have been used in the Willapa Bay estuary in western Washington State to control the exotic invasive plant species Spartina alterniflora (cordgrass) and the native species of burrowing shrimp (Callianassa sp.; Upogebia sp.) that affect oyster production. Carbaryl, the only registered insecticide for control of burrowing shrimp, has not been extensively studied in the Willapa Bay. However, carbaryl use has been severely restricted, and alternatives likely to have less severe environmental impacts are being sought. Imidacloprid applied directly to exposed sediments when the tide is out is efficacious for burrowing shrimp control but lacks studies of its behavior in the estuary. For this study, imidacloprid dissipation was monitored as the tide was rising in Willapa Bay. Over 99% of applied material dissipated from small plots within 24 h, but residues near the analytical detection limit were found in sediments 28 days later. At a distance of 152 m along a transect from the plot in the direction of tidal flow, imidacloprid residues in water peaked within 10 min after initiation of tidal flow. Within 30 min, imidacloprid residues were not detected, nor were residues detected in the water any time over the next month after application. Carbaryl residues in water were also monitored, and they exhibited the same rise and fall at the 152 m distance from the experimental plot as did the imidacloprid residues. However, carbaryl levels significantly above the detection limit were still present in water over the next month after application. The rapid dissipation of imidacloprid from water was hypothesized to be due to extensive dilution by the tide. The hypothesis was tested in batch equilibration sorption studies with radiolabeled imidacloprid and Willapa Bay sediment. Sorption distribution coefficients were <1 mL/g, and hysteresis was not observed during two desorption cycles, suggesting that imidacloprid was widely dispersed to extremely low levels soon after application.

WEB resources for pesticide toxicology, environmental chemistry, and policy: a utilitarian perspective.

Information about pesticides has grown exponentially over the last four decades and is marked by a diversity of sources including government, universities, environmental advocates, and industry. The internet has made access to this unprecedented amount of information faster than ever, but judging the validity and usefulness of the information is problematic. To avoid turning this discussion of web resources for pesticide information into a narrative about a personal 'top ten' list, a utilitarian perspective of resources useful to a research, educator, and risk communicator is elucidated. Useful web sites are fit into the context of information needed for risk assessment, which includes hazard identification, dose-response relationships, exposure assessment, and risk characterization. In addition resources for pesticide policy and regulations are considered. Specific ways in which the sites are useful are discussed along with information about site updating and validation of information.